渤西终端放空天然气回收工艺方案研究
Research on Boxi Terminal Vent Gas Recovery Process
浏览(1775) 下载(5)
- 引用格式:
-
张时佳,张,斌.渤西终端放空天然气回收工艺方案研究[J].天然气与石油,2014,32(4):0.doi:
Zhang Shijia, Zhang Bin.Research on Boxi Terminal Vent Gas Recovery Process[J].Natural Gas and Oil,2014,32(4):0.doi:
- DOI:
- 作者:
- 张时佳 张 斌
Zhang Shijia, Zhang Bin
- 作者单位:
- 天津中海油工程设计有限公司
Tianjin Engineering Design Co., Ltd., CNOOC
- 关键词:
- 放空天然气;回收工艺;螺杆压缩机
Flare gas; Recovery process; Screw compressor
- 摘要:
- 渤西终端的放空天然气大部分去火炬燃烧。为了减少温室气体排放,节约能源,有必要将常规不予回收的放空天然气进行回收再利用。分析了国内外放空天然气回收工艺方法,针对渤西终端火炬系统的现状,提出采用气柜回收放空天然气的方法,不影响火炬系统紧急泄放。该方案实施可行,且能取得良好的效益。建议在各终端处理厂推广应用放空天然气回收工艺。
Most of natural gas from Boxi terminal is led into flare system and vented to the air after burning. Natural gas is a kind of clean and non-renewable resources, it is necessary to recover the vented gas for reusing. Conducted is analysis and review on vented gas recovery techniques at home and abroad and proposed is the method for vented gas recovery by using gas holder, which will not affect emergency relief of flare system. Application results show that this method is feasible and good benefit can be obtained by adoption of this method and it is suggested that such vented gas recovery technique is popularized and applied in other terminal treatment plants.