消防设计中防火门的设置及联动控制分析
Layout and Linkage Control Analysis on Fire Doors in Fire Design
浏览(1740) 下载(3)
- 引用格式:
-
钱慧,祁晓莉,李佳,陈尹,张勇.消防设计中防火门的设置及联动控制分析[J].天然气与石油,2016,34(2):0.doi:
Qian Hui, Qi Xiaoli, Li Jia, Chen Yin, Zhang Yong.Layout and Linkage Control Analysis on Fire Doors in Fire Design[J].Natural Gas and Oil,2016,34(2):0.doi:
- DOI:
- 作者:
- 钱 慧1 祁晓莉1 李 佳1 陈 尹2 张 勇1
Qian Hui, Qi Xiaoli, Li Jia, Chen Yin, Zhang Yong
- 作者单位:
- 1.中国石油集团工程设计有限责任公司西南分公司,2.中国石油天然气股份有限公司西南油气田公司川中油气矿
1.China Petroleum Engineering Co., Ltd. Southwest Company;2.Central Sichuan Oil and Gas District, PetroChina Southwest Oil & Gasfield Company
- 关键词:
- 油气田工程；火灾自动报警；防火门；消防联动控制
Oil and gas field engineering; Automatic fire alarm; Fire door; Fire linkage control
- 摘要:
- 现代油气田地面建设工程中,工业建筑及其配套的行政办公楼等民用建筑规模大、标准高、设备众多,因此对火灾自动报警和消防联动系统提出了更高要求。防火门作为一种自动消防设备,能在火灾发生初期对火灾发生区域进行隔离,在一定程度上控制火势蔓延,因此被广泛应用于油气田地面建设配套工程中。在满足GB 50016-2014《建筑设计防火规范》和GB 50116-2013《火灾自动报警系统》的情况下,针对实际工程中出现的防火门设计不明确的情况,浅析了如何合理设计防火门的位置、开启方式以及其与火灾自动报警系统的联动,为将来类似工程的防火门联动控制设计提供借鉴。
Industrial buildings and civil buildings like its supporting administration building in oil and gas field surface engineering are of large scale, high standard and with mass devices, raising higher requirements for automatic fire alarm and fire linkage system. Fire doors, as a kind of automatic fire fighting equipments, can isolate the fire area at the beginning of the fire, so as to control the fire spreading to some extent. Therefore it is widely used in the supporting engineering in oil and gas field surface engineering. In accordance with the Code for Fire Protection Design of Buildings (GB50016-2014) and Code for Design of Automatic Fire Alarm System (GB50116-2013), in view of fire undefined design of fire door in actual engineering, the appropriate design of the position of fire doors, opening mode and its linkage with automatic fire alarm system are analyzed in the article, which is instructive for linkage control design of fire doors in similar projects in the future.
