调峰型地下储气库注气压缩机选型配置建议
Suggestions for Model Selection and Configuration of Gas Injection Compressor for Peak-Shaving Underground Gas Storage
浏览(1413) 下载(22)
- 引用格式:
-
王铁军,齐德珍,王赤宇,郝颜杰,张红军,吴玉琰.调峰型地下储气库注气压缩机选型配置建议[J].天然气与石油,2020,38(4):9-13.doi:10.3969/j.issn.1006-5539.2020.04.002
Wang Tiejun, Qi Dezhen, Wang Chiyu, Hao Yanjie, Zhang Hongjun, Wu Yuyan.Suggestions for Model Selection and Configuration of Gas Injection Compressor for Peak-Shaving Underground Gas Storage[J].Natural Gas and Oil,2020,38(4):9-13.doi:10.3969/j.issn.1006-5539.2020.04.002
- DOI:
- 10.3969/j.issn.1006-5539.2020.04.002
- 作者:
- 王铁军1，齐德珍1，王赤宇2，郝颜杰1，张红军1，吴玉琰1
Wang Tiejun1, Qi Dezhen1, Wang Chiyu2, Hao Yanjie1, Zhang Hongjun1, Wu Yuyan1
- 作者单位:
- 1. 中油工程项目管理公司天津设计院,2. 中国石油塔里木油田公司迪那油气开发部
Tianjin Institute of China Petroleum Engineering & Construction Project Management Company, Tianjin, 300457, China 2. PetroChina Tarim Oilfield Company Dina Oil & Gas Development Department, Korla, Xinjiang, 841000, China
- 关键词:
- 地下储气库;注气规模;注气压缩机;选型配置
Underground gas storage; Gas injection capacity; Gas injection compressor; Model selection and configuration
- 摘要:
注气压缩机是地下储气库的核心设备,合理确定注气规模,进而确定注气压缩机数量及类型是注气系统设计的关键。结合国内已建地下储气库设计、运行经验,确定调峰型地下储气库注气规模；在总结国内储气库注气压缩机选型现状的基础上,结合国外储气库注气压缩机选型配置情况,对离心式压缩机在储气库中应用的可行性进行了初探,并针对不同规模储气库注气压缩机配置选型提出了建议,为储气库注气系统设计提供参考借鉴。
Gas injection compressor is the core equipment for underground gas storage. Appropriately identifying the gas injection capacity and the number and type of gas injection compressor is the key for the design of gas injection system.Based on the design and operation experience of existing underground gas storage in China, the principle for determining the gas injection capacity of peak-shaving underground gas storage is proposed.Based on the model selection of gas injection compressor for domestic gas storage and combining the compressor configuration in foreign gas storage, a preliminary study has been performed for the feasibility of the application of the centrifugal compressor in gas storage.Finally, suggestions have been made for the model selection and configuration of gas injection compressor of gas storages with different capacities, which is a valuable reference for the design of gas storage injection system.
